Jetting Into A New Era

Since the inception of abrasive waterjets, operators have been tethered to one major chore – the laborious multi-hour process of…

YOU CAN ALSO LISTEN TO THIS ARTICLE

Since the inception of abrasive waterjets, operators have been tethered to one major chore – the laborious multi-hour process of manually clearing out spent garnet abrasive from the tank. Between the backbreaking work and high disposal fees, the costs of this industry-standard abrasive quickly add up.

“I’ll call it a bit of an Achilles heel – the amount of abrasive that is used and the messiness of it,” says Charlie Wakefield, vice president of systems engineering at Flow International.

Flow developed a process that skips the abrasive drying phase and instead introduces recycled abrasive to the cutting head while wet.

For years, experts in the waterjet industry have looked for ways to reduce the amount of abrasive needed, often designing pumps with increased water pressure. Others focused on using alternative abrasives or drying the garnet abrasive and recycling it. None of these approaches fundamentally changed the overarching issue.

“When it’s 5 p.m. and the machine is turned off, what is left in that tank is still a problem,” Wakefield says.

Three years ago, the team at Flow set out to solve this long-standing industry headache: How could they develop a way to recycle the abrasive without requiring an operator to manually shovel out the tank?

“Instead of being a background project, it became one of our key initiatives,” Wakefield says.

Designing a breakthrough

One challenging task on the to-do list was to find a way to skip the drying phase and run the recycled wet abrasive back to the cutting head. The abrasive has always been introduced dry into the waterjet cutting process, and even those shops that recycle it put it through a drying phase before reintroducing it to the machine.

Ease of use remains imperative in manufacturing, and thanks to Flow’s approach to operational software, the NX Pro waterjet meets that demand.

“We went after that journey of ‘let’s simplify the process as much as possible,’” Wakefield says, acknowledging that making good on all the team’s goals would be far from “simple.”

Those efforts paid off, however. The result is the NX Pro, a machine Flow calls its “breakthrough” waterjet. As the first system to feature fully automated abrasive recycling, the waterjet is a next-generation solution engineered to redefine efficiency, performance and ROI.

The NX Pro comes in four models with work envelopes from 6.5 ft. by 6.5 ft. up to 13 ft. by 6.5 ft. All models are enclosed with panoramic windows and sliding doors that contain spray and dampen sound levels.

“You can have a conversation in front of this waterjet,” Wakefield says, “whereas with machines without containment, you have to kind of step away or wait for it to finish piercing.”

Relying on recyclables

The perks of containment are great, but what the team at Flow is most excited about is the recycling feature.

Glenn Erichsen, technical software product manager at Flow, explains that overcoming the dry abrasive dogma allowed refinement of the system into its current form. The process goes like this: The spent abrasive falls into the catcher tank, as with any other machine, but pipes in the bottom of the NX Pro extract the abrasive slurry from the tank and deliver it to a separate processing vessel.

With the NX Pro, spent abrasive is pumped from the capture tank to the recycling unit, which filters garnet that can be reused.

Within this vessel, the abrasive undergoes “classification,” which includes identifying large, small and optimal pieces of abrasive. Erichsen says larger particles that come from the cut material are filtered out first. As for the garnet, some of it will be reduced to a powder form, or “fines.” These are too small to be effective in waterjet cutting, so they, too, are filtered out.

“At that point,” he says, “you can use what’s left for cutting, and that’s where it’s revolutionary.”

Erichsen uses the word revolutionary because the industry has always used dry abrasive, which is fed from a hopper and introduced to the cutting head where it meets the high-pressure water supply. He says embracing the wet abrasive concept was the most challenging aspect of designing the NX Pro.

“We had to take the step of thinking outside the box,” Erichsen says, “and really doing something the industry had never done. And then you see how this steamrolls because you have to somehow move the wet abrasive to the cutting head. Then you have to make sure that you can still cut with that wet abrasive, so it was one thing leading to another.”

The recycling system is powered by shop air, which is used to extract the abrasive. There are no motors involved, and no manual intervention is required. While the operator is making cuts, the recycling component is doing its job – feeding recycled abrasive back to the cutting head.

The NX Pro’s pump features a variable frequency drive, which saves on energy costs but does not sacrifice cutting power.

By automating the tank clean-out process, the NX Pro eliminates the need for manual removal and the resulting machine shutdowns, reclaiming an estimated 40 to 80 hours of annual downtime for the user. Users also benefit from an estimated reduction in their consumable costs by as much as 50 percent.

Wakefield says the public demonstration of the waterjet at Fabtech in Chicago in 2025 “shocked the market.”

“All the big abrasive suppliers standing at our booth were saying, ‘you guys did it,’” he says. “And we had.”

Integrating efficiency

Rethinking the abrasive handling is part of a broader push to improve overall system efficiency. Wakefield says another introduction at Fabtech was the NX Pro “green pump,” which includes a variable frequency drive that allows the pump motors to ramp down during non-cutting movements, such as traverses or material loading and unloading.

“I correlate it to the automotive industry,” Wakefield says of the variable frequency drive. “When you pull up to a light, the car engine turns off. When you push the gas, away it goes. You’re saving energy during those non-operation times. We’re able to use the variable drive to do that.”

Watch the video to see a thorough overview of the NX Pro’s recycling technology and its associated cost savings.

The variable frequency drive is estimated to deliver 10 to 30 percent energy savings. The pump also features extended-life components that require fewer service intervals and diagnostics technology.

The NX Pro hardware updates coincide with significant software updates. The FlowCut NX has been “re-architected,” offering a new CAD kernel and a new interface. The upgrade improves the user experience and offers a reduced learning curve.

“We’ve made significant changes to the FlowCut NX software,” Erichsen says. “We took lessons we’ve learned over the last 30 years regarding software control and really made it easier to use.”

Wakefield notes that because the software has been around for so long – Flow has roughly 15,000 active users today – they did not make such drastic changes as to alienate those who are “very comfortable” with it.

“You see fathers, sons and now grandsons over the years who are using this software,” he says. “But we recognized the gap and knew we had to make that leap to newer technologies – the current architecture and graphical user interfaces really modernize it.”

Flow International

As waterjet technology evolves, we’re on top of it. See our coverage over the last 10-plus years.

Get industry news first
Subscribe to our magazines
Your favorite
magazines
under one roof